1. The voltage regulator of the hair transplanting machine outputs 200 volts AC to a 100 kV transformer. One end of the transformer is grounded, and the other end is connected to the screen in the wooden box.
2. Put the barrel containing the mixed glue in the mixing barrel, tighten the lid of the barrel, and then connect the air source and the spray gun. Then turn on the air source and let the fan blades in the mixing barrel stir the glue evenly.
3. Put the plastic parts that need to be hair transplanted into the glue mold, then put them into the vacuum box, turn on the spray box, spray a lot of glue on the plastic parts, then take the plastic parts out of the glue mold, and put them on the hanging wooden stick.
4. Put the wooden stick into the hair transplanting box, step on the switch, connect the power supply, and let the screen absorb the fluff under the high voltage of static electricity. Then turn the part that needs to be hair transplanted downward and keep swinging it towards the fluff. This is to ensure that the fluff can be evenly distributed in a period of time and fully absorb the plastic parts.
5. Put the implanted plastic parts and wooden sticks into the furnace to dry the glue.
6. Take the wooden stick out of the furnace, take the plastic parts out of the stick and put them away. After the plastic parts cool to room temperature, start cleaning the implanted surface.
