Toothbrush Packaging Machine

Plastic film roller: One of the essential components of a semi-automatic blister packaging machine is a plastic film roller which works as a base for the whole process. A layer of plastic film is separated from the roller and placed over the trays for the purpose of making a blister pack.

Heating system: It is another important part, as the temperature is a core requirement for blister forming as well as sealing.

Mold trays: Mold trays are of different shapes and sizes depending on the size of your products. A blister is placed over it for forming at the start and for sealing at the end.

Handle: This handle is attached to the flat plate in the machine on which mold trays are placed inside and picked outside. It helps in pushing and pulling trays.

Vacuum pump: The vacuum pump is integrated with a machine to exert negative pressure against blister packs, so they can be transformed into the shape of a die cavity.

Control panel: The heart of any packaging machinery is a control panel, on which all parameters and buttons are fixed. You have to set them according to your requirements, so it can process the material on prescribed commands.

Aluminum foil roller: An aluminum foil roller is a thin sheet prepared from a mixture of iron and silicone. It works as a high barrier against moisture, oxygen and especially against the impact of light. That’s why it is also used for separate packaging.

Sealing head: Sealing head is located upside the blister packs trays which seal the blister packs to the aluminum foil liner through heat pressure.