Workflow of the board loading machine

Put the PCB board to be printed on the loading port of the board loading machine, then start the board loading machine, correctly position the board according to the size of the board and the loading method, and then start feeding.
Set the program on the board loading machine, including parameters such as the size of the board, the number of layers, the type of components, and the position of the components. After the program is set, check once to ensure that the parameter settings are correct.
Start the printer and apply glue evenly on the PCB board, paying attention to the thickness and uniformity of the glue. After printing, the template of the printer needs to be removed from the board.
After the board is printed, it needs to be placed in a baking oven for baking to make the glue hard and ensure that the surface of the board is flat.
After baking, the board needs to be inspected, mainly to check whether the components on the board are complete, whether the position is correct, and whether the glue coating is uniform. If there are unqualified ones, they need to be repaired and re-tested.
The working process of the board loader is introduced in detail, so that readers can understand the specific steps of the board loader operation, so as to better master the use of this important equipment in electronic manufacturing. However, it should be noted that when operating the board loader, it is necessary to follow the correct process to ensure the normal operation of the equipment and the stability of printing quality.