1. The voltage stabilizer 200V AC provides one end of the 100KV transformer to the ground, and the other end is connected to the screen in the box.
2. Put the bucket containing the mixed glue in the mixing bucket, tighten the lid of the bucket, and then connect the air source and the spray gun, then turn on the air source, and first let the fan blades in the mixing bucket stir the glue evenly.
3. Put the rubber parts that need to be hair transplanted into the glue mold, then put them into the vacuum box, turn on the spray box, spray a lot of glue on the rubber parts, then take the rubber parts out of the glue mold, and then put them on the hanging wooden stick.
4. Put the wooden stick into the hair transplanting box, step on the switch, connect the power supply, and let the screen absorb the fluff under the high voltage of static electricity. Then turn the part to be implanted downwards and keep shaking it towards the fluff, so that the fluff inside can be evenly distributed for a period of time and fully absorb the plastic parts.
5. Put the plastic parts that have been implanted with hair and the wooden stick into the furnace to dry the glue.
6. Take the wooden stick out of the furnace, take the plastic parts out of the wooden stick and put them away. After the plastic parts cool to room temperature, start cleaning the implanted surface.
